Connect (cont.)
Connecting through the access point
You can make the setting for infrastructure mode※ (connection through the access point); however, confirm to your system administrator on network settings before changing any settings.
※“Glossary” (See page 62)
①Projector settings
1 Turn on the projector and press the [WIRELESS] button on the remote control.
2Select [USER 1]- [USER 3] from [NETWORK] at the wireless menu and press the [ENTER] button.
3 | Set the details of network and select [OK]. |
As for network setting items, see pages | |
| Confirm to your system administrator on network settings before changing any |
| settings. |
② Computer settings | |
4 | Turn on the computer. |
5Make the network setting according to your system administrator.
6Connect to your access point.
7Start Wireless Manager ME 3.0, and select [U] from [Network] of “Select Access Port” window.
| If the projector is not displayed, click [Designate] followed by [ADD], then enter |
| the IP address set in the projector using the “Access Port Registration” window, |
| and click [REGISTER]. (See page 20) |
8 | Select the desired projector, and click [OK]. |
The launcher appears and the connection with the projector is established. |
(“Description of the launcher” →See page 23)
19
