Setting up

Projection method

You can use the projector with any of the following 4 projection methods. To set the desired method in the projector.

JJMounting on the ceiling and

JJSetting on a desk/floor and

projecting forward

projecting from rear

 

(Using translucent screen)

JJMounting on the ceiling and

JJSetting on a desk/floor and

projecting from rear

projecting forward

(Using translucent screen)

 

Attention

zzFor optimum viewing quality, install the projector in a location where screen exposure to outside light, light from light fixtures or other light is at a minimum. Also draw the curtains, close blinds and turn off light fixtures.

zzDo not use the projector installed vertically or tilted right or left. Use under such conditions could result in equipment damage.

zzThe projector must be installed so that its inclination to the horizontal plane is ±30° or less. zzInstalling the projector at an inclination that exceeds 30° may reduce product life or

result in malfunction.

Parts for ceiling mount (Optional)

You can install the projector on the ceiling by using the optional ceiling mount bracket (ET-PKV100H: for high

ceiling, ET-PKV100S: for low ceiling), and the optional projector mount base ET-PKL100B. zzUse only the ceiling mount brackets specified for this projector.

zzRefer to the installation manual for the ceiling mount bracket when you install the bracket and the projector.

Attention

zzTo ensure projector performance and security, installation of the ceiling mount bracket must be carried by your dealer or a qualified technician.

Getting Started

ENGLISH - 21