Powering ON/OFF
Turning On the Projector
(3)
(3)
(2)
1111 Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector.
2222 Connect the projector’s AC power cord into an AC outlet. The <STANDBY(R)/ON(G)> indicator lights red. Open the lens cap.
3333 Press the < 
> button on the control panel or the remote control. The <STANDBY(R)/ON(G)> indicator lights green and the cooling fans start to operate. The preparation display appears on the screen and the count down starts.
06
The preparation display will disappear after 30 seconds.
Operation
4444 After the countdown, the input source that was selected the last time and the lamp power status icon appear on the screen.
5555 If there is no signal input when start on the projector, or the current signal is missed while operating the projector, the Video/Computer selection window will be displayed on the screen, please move the pointer to input source desired by pressing the Press ▲▼ and press the <SELECT> button. And then follow the input signal guidance window to correct the signal and
connection.
If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page.
Selected Input Source and Lamp power
Lamp power status
Video/Computer selection
Basic
Note
zzWhen the [Logo select] function is set to [Off ], the logo will not be shown on the screen (Æpage 53).
zzWhen [Countdown off ] or [Off ] is selected in the [Display] function, the preparation display will not be shown on the screen (Æpage 53).
zzWhen the [Input search] function is set to [On 2], the input signal will be searched automatically (Æpage 52).
zzWhen the [Direct on] function is set to [On], the projector will be turned on automatically by connecting the AC power cord to an AC outlet.
ENGLISH - 29