Screen

Select [Screen] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu.

Remote Control

Control Panel

Normal

Provide the image to fit the screen size while maintaining the aspect ratio of the input signal.

Press ▲▼ to select [Normal] and then press the <SELECT> button.

True

Provide the image in its original size. When the original image size is larger or smaller than the panel

size*, the projector enters to the panning mode automatically.

1111 Press ▲▼ to select [True] and then press the <SELECT> button.

2222 Press ▲▼◄► to pan the image.

zzWhen adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.

*Panel size (1280 x 800) is only for PT-LW25HU. Panel size (1024 x 768) is for PT-LX30HU and PT-LX26HU.

Note

zzWhen input computer signal to the projector, [True] will be available.

zzTrue is disabled and cannot be displayed when [480i], [576i], [480p], [576p], [720p], [1035i] or [1080i] is selected in the PC System Menu.

zzWhen [True] is selected in the [Screen] menu, [Digital zoom +/-] can not be selected.

Settings

Full

Provide the full screen image.

Press ▲▼ to select [Full] and then press the <SELECT> button.

Wide(16:9)

Provide the image at the 16:9 wide screen ratio.

Press ▲▼ to select [Wide(16:9)] and then press the <SELECT> button.

Zoom

Scale the image proportionally to fit the entire screen. Either side of image may go over the screen.

Press ▲▼ to select [Zoom] and then press the <SELECT> button.

Natural wide (PT-LW25HU Only)

Modify the 4:3 aspect ratio image to fit the screen size by stretching the image to make it look natural.

Press ▲▼ to select [Natural wide] and then press the <SELECT> button.

Note

zzWhen input video signal to the projector, [Natural wide] will be available.

Custom

Provide the last stored aspect screen image.

Press ▲▼ to select [Custom] and press the <SELECT> button.

48 - ENGLISH