Powering ON/OFF

Turning Off the Projector

1111 Press the < > button on the control panel or

 

the remote control, and Power off? appears on

 

the screen.

Power off? disappears after 4 seconds.

 

2222 Press the < > button on the control panel or the remote control again to turn off the projector. The <STANDBY(R)/ON(G)> indicator starts to blink red, and the cooling fans keep running.

At this time, you can unplug the AC power cord even if the fans are still running.

3333 When the projector has cooled down enough, the <STANDBY(R)/ON(G)> indicator stops blinking and you can turn on the projector.

Note

zzDo not put the projector in a case before the projector is cooled enough.

zzWhile the <STANDBY(R)/ON(G)> indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the <STANDBY(R)/ON(G)> indicator stops blinking to turn on the projector again. zzThe projector can be turned on after the <STANDBY(R)/ ON(G)> indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan cooling is completed, compared with the time the

AC power cord is immediately unplugged after the power- off.

JJDirect Power Off function

You can disconnect the power cord from the wall outlet or turn off the breaker even during projection without pressing the <> button.

Note

zzWhen using the Direct power Off function, you can not restart the projector immediately after the power is disconnected. If the external power supply is suddenly cut off, the fans stop immediately. The lamp remains high temperature and needs to be cooled.

zzWhen the lamp has been cooled by the direct power off function, it sometimes takes longer than usual for the lamp to light up again.

Basic Operation

ENGLISH - 31