Started Getting

Basi

Connections

Before connecting to the projector

zzRead carefully the instruction manual for the device to be connected. zzTurn off the power switch of the devices before connecting cables.

zzIf any connection cable is not supplied with the device, or if no optional cable is available for connection of the device, prepare a necessary system connection cable to suit the device.

zzVideo signals containing too much jitter may cause the images on the screen to randomly wobble or wafture. In this case, a time base corrector (TBC) must be connected.

zzThe projector accepts the following signals: VIDEO, S-VIDEO, analogue-RGB (with TTL sync. Level). zzSome computer models are not compatible with the projector.

zzWhen using long cables to connect with each of equipment to the projector, there is a possibility that the image will not be output correctly unless a compensator is used.

zzFor details on what video signals the projector supports, see “List of compatible signals”. (Æpage 71)

Connecting example

 

 

Computer

Video deck

Control computer

(TBC built-in)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SERIAL IN

LAN

COMPUTER 2 IN

COMPUTER 1 IN /

COMPUTER

VIDEO IN

COMPONENT IN

AUDIO IN

S-VIDEO IN

R

AUDIO IN

L

Attention

zzWhen connecting with a video deck, be sure to use the one with a built-in time base corrector (TBC) or use a TBC between the projector and the video deck.

zzIf nonstandard burst signals are connected, the image may be distorted. If this is the case, connect a TBC between the projector and the video deck.

Note

zzFor the specifications of the RGB signals that can be applied from the PC, refer to “List of compatible signals”. (Æpage 71) zzSee “Network operation” in the instruction manual on the supplied CD-ROM for the details of wired LAN communication

between the projector and the computer.

26 - ENGLISH