Custom adj.

Adjust the screen scale and position manually with this function.

1111Press ▲▼ to select [Custom adj.].

2222Press ► or the <SELECT> button to enter the next submenu.

3333Press ▲▼ to choose the item you want to adjust.

zzYou can choose one from the items as below:

Scale H/V

Adjust the [Horizontal/Vertical] screen

scale.

 

H&V

When set to [On], the aspect ratio is

fixed.

 

Position H/V

Adjust the [Horizontal/Vertical] screen

position.

Common

Save the adjusted scale or position

to all the inputs.

 

Reset

Reset the all adjusted values.

Digital zoom +

Zoom in the images.

1111Press ▲▼ to select [Digital zoom +] and then press the <SELECT> button.

zzThe On-Screen Menu disappears and [D. zoom + ] appears.

2222Press the <SELECT> button to zoom in the image size and press ▲▼ ◄►to move the image to the top/bottom/left/ right of the screen.

zzThe Panning function can work only when the image is larger than the screen size. A projected image can be also zoomed in by pressing the <D.ZOOM + > or the <SELECT> button.

Digital zoom -

Zoom out the images.

1111Press ▲▼ to select [Digital zoom -] and then press the <SELECT> button.

zzThe On-Screen Menu disappears and [D. zoom - ] appears.

2222Press the <SELECT> button to zoom out the image size.

zzThe projected image can be also zoomed out by pressing the <D.ZOOM – > or the

Screen

<SELECT> button.

To exit the Digital zoom +/– mode, press any button except the <D.ZOOM +/–>, <SELECT> and ▲▼◄► buttons.

To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (Æpage 39) again, or adjust the screen size with the <D.ZOOM +/–> buttons.

Note

zzWhen input computer signal to the projector, this function will be available.

zz[Digital zoom +/-] cannot be selected when [True] is selected in the [Screen] menu.

zz[Digital zoom -] cannot be selected when [Custom] is selected in the [Screen] menu.

zz[Digital zoom +/–] are disabled and cannot be displayed when [480i], [576i], [480p], [576p], [720p], [1035i] or [1080i] is selected in the PC System Menu. (Æpage 40)

Keystone

This function is used to adjust keystone distortion of the projected image.

1111Press ▲▼ to select [Keystone].

2222Press ► or the <SELECT> button.

3333Press ▲▼ to choose the item you want to adjust.

Keystone

To correct keystone distortion.

Store

To store or reset the keystone

correction.

 

The following items are the submenu of [Store].

Store

Keep the keystone correction

even when the AC power cord is

 

unplugged.

Reset

Release the keystone correction

when turn off the projector.

 

Settings

ENGLISH - 49