Setting up
Adjusting front adjustable foot
Lift the front of the projector and press the foot lock latch on the projector.
Release the foot lock latch to lock the adjustable foot and rotate the adjustable foot to a proper height and tilt. You can turn the front adjustable foot to extend it. You can turn it in the opposite direction to contract it. (You can adjust the projection angle vertically.)
Foot Lock Latch
Adjustable range
Front adjustable foot : 40mm(1.575")
Attention
zzHeated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjust the front adjustable foot.
zzIf keystone distortion occurs on the projected image, perform “KEYSTONE” from the “Screen” menu. (Æpage 49)
Note
zzScrew up the adjustable foot, and an audible click will be heard as the limit.
Getting Started
ENGLISH - 25