Settings

Setting

Lamp power

This function allows you to change brightness of the screen.

1111Press ▲▼ to select [Lamp power] and then press the <SELECT> button .

2222Press ▲▼ to select one among the modes as below.

zzYou can also press the <LAMP> button to display [Lamp power].

High Brighter than the Normal mode.

Normal Normal brightness.

Lower brightness reduces the Eco lamp power consumption and

extends the lamp life.

Remote control

This switching function prevents remote control interference when operating several projectors or video equipment at the same time.

1111Press ▲▼ to select [Remote control].

2222Press ► or the <SELECT> button.

3333Press ▲▼ to select one among the seven codes.

zzThis projector provides 7 different remote control codes: [ALL], [Code 1]~[Code 6].

Attention

zzWhen operating the projector under [ALL] code, you can operate several projectors at the same time. If you want to operate the projector independently, you must switch to other code.

zzWhen different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on the projector.

zzIf the batteries are removed from the remote control for a long period of time, the remote control code will be reset.

Security

This function allows you to use the [Key lock] and [PIN code lock] function to set the security for the projector operation.

1111Press ▲▼ to select [Security].

2222Press ► or the <SELECT> button to access the submenu.

JJKey lock

This function locks the control panel and remote control buttons to prevent operation by unauthorized persons.

1111 Press ▲▼ to select the desired items as below.

Unlocked.

Lock the operation of the control panel. To unlock, use the remote control.

Lock the operation of the remote control. To unlock, use the control panel.

JJPIN code lock

This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.

1111 Press ▲▼ to select the desired items as below.

Off

Unlocked.

 

 

On1

Enter the [PIN code] every time

turning on the projector.

 

 

 

 

Enter the [PIN code] to operate

 

the projector once the power cord

On2

is disconnected; as long as the

AC power cord is connected, the

 

 

projector can be operated without

 

a PIN code.

Attention

zzWhenever you change the PIN code lock setting or the [PIN code] (the four-digit number), you are required to enter the [PIN code]. The "1234" is set as the initial [PIN code] at the factory.

JJPIN code change

The [PIN code] can be changed to your desired four- digit number.

1111 Press ▲▼ to select [PIN code change] and then Press <SELECT> button.

zzCurrent Pin code dialog box appears.

2222 Press ▲▼ to enter the current code. Press ► button to fix the number and move the red frame pointer to the next box.

zzThe [New PIN code] input dialog box appears.

3333 Repeat these steps to set a new [PIN code].

56 - ENGLISH