Operation Basic

Projecting

Check the connections of the peripheral devices and connection of the power cord (Æpage 27) and switch on the power (Æpage 29) to start the projector. Select the image and adjust the state of the image.

Selecting the image

Select an input signal.

The image selected with the <COMPUTER 1>, <COMPUTER 2>, <VIDEO>, <S-VIDEO>, or <COMPONENT> button is projected (Æpage 33).

Attention

zzImages may not be projected properly depending on the connected device and DVD, video tape, etc. to be played. Select a system format that is suitable for the input signal in [Component] or [RGB] in the [Input] menu (Æpage 39).

zzCheck the aspect ratio of the screen and the image and select the optimum aspect ratio under the [Screen] menu (Æpage 48).

How to adjust the state of the image

1111Adjust the projection angle.

zzFor details, see “Adjusting front adjustable foot”. (Æpage 25)

2222Adjust the zoom and the focus.

Turn [Zoom ring] and [Focus ring] to adjust the

image.

Focus Ring

Zoom Ring

 

Note

zzIt is recommended that the images are projected continuously for at least 30 minutes before the focus is adjusted.

zzIf you adjust the focus, you may need to adjust the size of the image by adjusting the zoom ring again.

zzIf keystone distortion occurs, see “KEYSTONE” (Æpage 49).

32 - ENGLISH