Information

Select [Information] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu.

Remote Control

Control Panel

Input Source Information Display

The [Information] Menu is used for checking the status of the image signal being projected and the

operation of the projector.

You can also Press the <INFO.> button on the remote control to display the [Information] menu.

JJInput

The selected [input source] is displayed.

JJSystem

The selected system is displayed.

JJH-sync freq.

The selected [H-sync freq.] is displayed.

The horizontal frequency of the input signal is displayed in KHz, or - - - KHz when no signal.

JJV-sync freq.

The selected [V-sync freq.] is displayed.

The vertical frequency of the input signal is displayed in Hz, or - - - Hz when no signal. Numbers of Hz doubles when during Interlace.

JJScreen

The selected Screen size is displayed.

JJLanguage

The selected language is displayed.

Information

JJLamp power

The selected lamp mode is displayed.

JJLamp runtime

The cumulative lamp operating time is displayed.

JJPower management

[Off ], [ Ready] or [Shut down], and [Timer] are displayed.

JJKey lock

The selected Key lock icon is displayed.

JJPIN code lock

[Off ], [On 1] or [On 2] is displayed.

JJRemote control

The selected remote control code is displayed.

JJSerial number

The serial number of the projector is displayed. The serial number is used to service the projector.

Settings

ENGLISH - 59