Troubleshooting
| Please check following points. For details, see the corresponding pages. |
| |||
|
|
|
|
|
|
|
| Problem |
| Cause | Reference |
|
|
| page | ||
|
|
|
|
| |
|
|
| zzThe power cord may not be connected. | — | |
|
|
| zzNo electric supply is at the wall outlet. | — | |
|
| Power does not turn | zzThe circuit breakers have tripped. | — | |
|
| on. | zzIs the <LAMP> indicator, <STANDBY(R)/ON(G)> indicator, or | 28, 60 | |
|
|
| |||
|
|
|
| <WARNING> indicator lit or blinking? |
|
|
|
| zzThe lamp cover has not been securely installed. | — | |
|
|
|
|
| |
|
|
| zzThe video signal input source may not be connected to a terminal | 26 | |
|
|
|
| properly. |
|
|
| No picture appears. | zzThe input selection setting may not be correct. | 33 | |
|
| zzThe [Brightness] adjustment setting may be at the minimum setting. | 45 | ||
|
|
| zzThe input source which is connected to the projector may have a problem. | — | |
|
|
| zzThe [AV MUTE] function may be in use. | 34 | |
|
|
|
|
| |
|
|
| zzThe lens focus may not have been set correctly. | 32 | |
|
| The picture is fuzzy. | zzThe projector may not be at the correct distance from the screen. | 22 | |
|
| zzThe lens may be dirty. | 14 | ||
|
|
| zzThe projector may be tilted too much. | — | |
|
|
|
|
| |
|
|
| zz[Color] or [Tint] adjustment may be incorrect. | 45 | |
|
| The color is pale or | zzThe input source which is connected to the projector may not be adjusted | — | |
|
| grayish. |
| correctly. |
|
|
|
| zzRGB cable is damaged. | — | |
|
|
|
|
| |
|
|
| zzThe input terminals may not have been correctly connected. | 26 | |
|
| No sound from the | zzThe volume may have been set to the minimum level. | 35 | |
|
| internal speaker | zzThe [AV MUTE] function may have been turned on. | 34 | |
|
|
| zzThe [MUTE] function may have been turned on. | 35 | |
|
|
|
|
| |
|
|
| zzThe batteries may be weak. | — | |
|
|
| zzThe batteries may not have been inserted correctly. | 20 | |
|
| The remote control | zzThe remote control signal receptor on the projector may be obstructed. | 17 | |
|
| does not operate. | zzThe remote control unit may be out of the operation range. | 17 | |
|
|
| zzStrong light such as fluorescent shine onto the signal receptor. | 17 | |
|
|
| zzWhen different codes are set on the projector and on the remote control. | 56 | |
Maintenance |
|
| |||
|
|
|
|
| |
| The control buttons | zz |
|
| |
|
| zzThe control panel is not available if the control panel is locked at [Key | 56 | ||
|
| of the projector do |
| lock] under [Security] of [Setting] section. |
|
|
| not operate. |
|
|
|
|
| The picture does not | zzThere may be a problem with the VCR or other signal source. | — | |
|
| display correctly. |
| A signal which is not compatible with the projector is being input. | |
|
|
|
|
| |
|
| Picture from a | zzThe cable may be longer than the optional cable. | — | |
| |||||
|
| computer does not | zzThe external video output from a laptop computer may not be correct. | — | |
|
| appear. | |||
|
|
|
|
| |
|
| The image is | zzCheck [PC adj.] or [Screen] and adjust them. | 42,48 | |
|
| distorted or runs off. |
|
|
|
Note
zzIf the problem persists, after confirming the contents of the table, please consult your dealer.
66 - ENGLISH