Basic operations by using the remote control

Using the P-TIMER button

Press the <P-TIMER> button on the remote control to operate the [Count up/Count down] function.

Button

Press <P-TIMER> button on the remote control.

Note

zzTo stop the count time, press the <P-TIMER> button. To cancel the [P-timer] function, press and hold the <P-TIMER> button. (Æpage 55)

Using the LAMP button

This function allows you to select the lamp mode for changing the brightness on the screen.

Controlling the volume of the speaker

You can control the volume of the projector’s speaker.

Buttons

Press the <VOLUME+/–>buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few

seconds.

Note

zzFor details, see “Volume” of "Sound" under Main menu. (Æpage 51)

Using the IMAGE button

This function allows you to select a desired image

mode of the screen.

Button

Press <LAMP> button on the remote control.

Note

zzFor details, see “Lamp Power” of "Setting" under Main menu. (Æpage 56)

Button

Press <IMAGE> button on the remote control to select the desired image mode among [Dynamic], [Standard], [Real], [Cinema], [Blackboard (Green)], [Colorboard], [Image 1], [Image 2], [Image 3] and [Image 4].

Using the D.ZOOM buttons

This function allows you to enter to the Digital zoom +/– mode.

Buttons

Press <D.ZOOM+/-> buttons on the remote control.

Note

zzFor details, see "Screen" of Main menu. (Æpage 48)

Using the MUTE button

Press this button on the remote control to select [On] to temporarily turn off the sound.

Button

Press <MUTE> button on the remote control.

Note

zzTo turn the sound back on, press this button again or press the <VOLUME+/–> buttons. (Æpage 51)

Basic Operation

ENGLISH - 35