Playback Mode
Playback Mode
Playing Back a Tape
The recorded scene can be played back immediately after the recording.
1Set the [OFF/ON] Switch 44 to [ON].
• The [POWER] Lamp 41 lights up.
44
41
2 Set the Mode Dial 40 to Tape Playback Mode.
40 
3Press the [ 
] Button 17 to rewind the tape.
17
•Rewind the tape to the point where you want to start playback.
•When the tape reaches the beginning, rewinding stops automatically.
4Press the [►] Button 15 to start playback.
• The [ 
] Indication appears.
15
•If a cassette recorded with copyright protection signal is played back, the picture is distorted by
To Stop Playback
Press the [ 
] Button 16 .
Adjusting the Sound Volume
To adjust the volume, push the [W/T] Lever 26 to display the [VOLUME] Indication. Push the [W/T] Lever towards [T] to increase the volume or push the [W/T] Lever towards [W] to decrease the volume. The [VOLUME] indication disappears immediately after adjustment is made.
26
To adjust the volume with the Remote Control, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] indication disappears immediately after adjustment is made.
•The sound volume cannot be adjusted using the Remote Control in Playback Zoom Mode. (pp.
•For other notes concerning this item, see page 64.
Finding a Scene You Want to Play Back
Cue/Review Playback
17 
14
If the [
] Button 14 or [ 
] Button 17 is pressed during Playback, it turns to Cue Playback
Aor Review Playback B .
AB
•If the Button is held continuously, it turns to Cue Playback or Review Playback until you release it.
16
35
