Editing Mode

Editing Mode

Recording from a Tape onto a Card (For PV-GS12/PV-GS14/PV-GS15)

Still pictures can be recorded on the Memory Card from scenes that have already been recorded on a cassette.

1 Set the Mode Dial 40 to Tape Playback Mode.

40

2Start playback and set the Camcorder to Still Playback Mode at the scene you wish to record, and press the [PHOTO SHOT] Button

36 .

36

Recording Pictures from a Card onto a Tape (For PV-GS12/PV-GS14/ PV-GS15)

Card Images can be recorded to the Tape.

1Set the Mode Dial 40 to Picture Playback

Mode.

40

2Display the first picture.

3Press the [PHOTO SHOT] Button 36 .

36

During the copying, the following Indication appears.

It takes a few seconds to record a picture to the Tape.

When recording to tape, select the tape position before recording. The picture will be recorded to the tape position when the [PHOTO SHOT] Button is pressed at Step 3.

Photoshot index signals are automatically recorded.

For other notes concerning this item, see page 65.

Audio Dubbing (Remote Control Only)

This feature is only available with Remote Control. However it is not supplied for models PV-GS9/ PV-GS12/PV-GS14. If you would like to order, the parts number is LSSQ0410 as a replacement parts. Please refer to page 74.

You can add music or narration to the recorded Cassette.

If the tape recorded in the [16bit] Mode is dubbed with the Audio Dubbing function, the original sound is erased. (If you wish to preserve the original sound, use the [12bit] Mode when recording.)

Audio Dubbing cannot be performed on a recording made in LP Mode. (p. 23)

1Press the [ ] Button 69 on the Remote

Control where you want to add new sound.

55

69

2Press the [A.DUB] Button 55 on the Remote

Control.

3To start Audio Dubbing, press the [ ] Button 69 on the Remote Control.

To Cancel Audio Dubbing

Press the [ ] Button 69 on the Remote Control. The Camcorder is in the Still Playback Mode again.

To Play Back the Sound Recorded by 12bit Audio Dubbing

Set [TAPE PLAYBACK MENU] >> [PLAYBACK] >> [12bit AUDIO] >> [ST1], [ST2] or [MIX].

ST1: It plays back only the original sound.

ST2: It plays back only the sound added by Audio Dubbing.

MIX: It plays back both the original sound and the sound added by Audio Dubbing simultaneously.

44

 

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

 

Page 44
Image 44
Panasonic PV-GS9 Audio Dubbing Remote Control Only, To Cancel Audio Dubbing, Card Images can be recorded to the Tape