Panasonic PV-GS9 Copying on an S-VHS or a VHS Cassette, Using the DV Cable for Recording

Editing Mode

To Dub Audio While Listening to a Pre-recorded Sound

When pausing the audio dubbing, set the [12bit AUDIO] on the [PLAYBACK] Sub-Menu to [ST2] and you can check the pre-recorded sound.

When a microphone (For PV-GS14/PV-GS15) is used for audio dubbing, use headphones to listen to the pre-recorded sound while dubbing the audio. (When using headphones, set [AV JACK] on the [INITIAL] to [OUT/PHONES].)

When the line input is used, you can dub audio while listening to the pre-recorded sound from the speaker.

• For other notes concerning this item, see page 65.

Copying on an S-VHS (or a VHS) Cassette

(Dubbing)

After connecting the Camcorder and the VCR as illustrated, start the following procedures.

Camcorder:

1 Insert the recorded Cassette.

VCR:

2Insert an unrecorded Cassette with an erasure prevention tab.

•If various setups (such as external input, tape speed, etc.) are required, please refer to the operating instructions of your VCR.

Camcorder:

3 Press the [►] Button to start playback.

VCR:

4Start recording.

5Press the Pause or Stop Button to stop recording.

Camcorder:

6 Press the [ ] Button to stop playback.

Using the DV Cable for Recording

(Digital Dubbing)

[S-VIDEO IN]

2

(For PV-GS14/ PV-GS15)

[VIDEO IN]

[AUDIO IN]

1

By connecting this Camcorder with other digital video equipment (such as another Camcorder of the same format/model) that has a DV input/output Terminal, and using a 4-pin to 4-pin DV Interface Cable PV-DDC9 (optional) 1 , high quality images and sounds can be dubbed in the digital mode.

1

Player/Recorder:

1Insert the Cassette and set to Tape Playback Mode.

Player:

2 Press the [►] Button 72 to start playback.

1AV Cable

2S-Video Cable (not supplied)

•Be sure to press the [OSD] Button (p. 14) on the Remote Control prior to copying so that no indications are visible. Otherwise, the displayed tape counter and function indications are also copied.

54

72	69
70

45