Panasonic UB-5315 Loading Copy Paper, Pull the paper cover forward as shown in the left figure

Loading Copy Paper

It is possible to load up to 40 sheets of A4 (Letter*) size copy paper (assuming a paper weight of 80 g/m2). Note that only A4 (Letter*) size paper may be used.

When the unit is first used or when “ ” flashes on the Multi-Copy/Error Indicator to indicate that the unit is out of paper, load copy paper as described below.

* Letter size is for U.S.A. and Canada models.

Notes on Loading Copy Paper

Follow the guidelines below to ensure smooth and accurate printing by the unit.

•Only use A4 (Letter) size copy paper having a weight of 60 to 90 g/m2 as the copy paper for this unit.

•Do not simultaneously load paper of varying type and thickness as this may result in paper jams.

•Before adding copy paper, be sure to remove all the copy paper remaining inside the unit’s paper cover. (Note that copy paper will slightly resist being removed, but may be pulled out without problems.)

After removing the copy paper, stack the removed paper together with the new paper, fan it thoroughly, square it and reload.

DO NOT USE THE FOLLOWING TYPES OF PAPER

•Extremely smooth or glossy paper

•Coated paper

•Thermal paper

•Paper that is printed on one side

•Wrinkled paper, creased paper, etc.

1

ON

OFF

2

Set the power switch to on ( I ).

•“ ” will flash on the Multi-Copy/Error Indicator when copy paper has run out.

Pull the paper cover forward as shown in the left figure.

12