Panasonic UB-5315 installation manual Installing the Thermal Transfer Film

Installing the Thermal Transfer Film

English

Blue gear

White shaft

4

Blue gear

3) Place the blue gear on the front right groove.

4)Place the white shaft on both sides of the back grooves.

Tighten the film, then close the printer door.

1)Rotate the blue gear in the direction of the arrow to take up the slack on the film.

• If a slack remains, perform step 3-2) through 4-1) again.

2)Securely close the printer door by using both hands until a click is heard.

	• “ ” flashing on the Multi-Copy/Error Indicator will go
Latches	out.

Notes

•If “ ” is still flashing after closing the printer door, make sure that the thermal transfer film has been installed properly and tightened.

•The printer door should be closed to make copies properly. Confirm both latches are locked.

11