Daily Care and Maintenance | Panasonic UB-5315 specs

Daily Care and Maintenance

English

2

Cotton swab

Printer head

(Gold)

Clean the Printer Head

Dampen the tip of a cotton swab in ethyl alcohol and gently wipe the printer head.

Note

•Never touch the printer head or the surrounding area with your hands as this may disable copying.

3	Pick-up roller
3	Platen roller
4
	Latches

Clean the Platen Roller and the Pick-up Roller

Remove the thermal transfer film with both hands and carefully wipe any dirt or stains off the platen roller and pick-up roller.

•For details on removing the thermal transfer film, see page 16.

•Dampen a soft cloth with neutral kitchen cleaner diluted in water, wring the cloth thoroughly, and wipe the entire surface of the rollers while rotating them. If this does not remove all dirt, wipe with a cloth dampened with ethyl alcohol.

Install the thermal transfer film in its original position and close the printer door.

•For details on installing the thermal transfer film, see pages 10, 11.

•Close the printer door firmly until a click is heard.

Note

•If “ ” is displayed on the Multi-Copy/Error Indicator when the power is turned on, this indicates that the thermal transfer film has not been installed properly or that there is slack in the thermal transfer film. Check the condition of the thermal transfer film and for slack in the thermal transfer film.

33

Image 33

Panasonic UB-5315 installation manual Daily Care and Maintenance

Contents

Electronic Board UB-5815 Accessories Thank you for purchasing the Panasonic Electronic BoardRecord these items for future reference Table of Contents For Your Safety How to replace the fuseSafety Information Precautions CD-ROM Precautions Replacing Part Names and Functions Panel Name Description Part Names and Functions Control panel Set the power switch to on Installing the Thermal Transfer FilmPush down the printer open lever and open the printer door Insert the blue shaft into the front left hole Installing the Thermal Transfer Film Pull the paper cover forward as shown in the left figure Loading Copy Paper Close the paper cover until a click is heard Loading Copy Paper Press the Copy Key Making Copies Making Copies Copy types and procedures Copy Type Procedure Replacing the Thermal Transfer Film Remove the jammed paper Paper Jams Paper Jams Install the thermal transfer film Close the paper cover Turn the power on Screen Height Adjustment Loosen the height adjustment handlesHang the screen in the desired slots of the slide plates Tighten the height adjustment handles Screen Height Adjustment Connecting the unit to a computer Contents of CD-ROMComputer Interfacing System requirements Installing the USB and Printer driver Windows Installing the driver and softwareComputer Interfacing Check button and click the Next button Windows Me Special Note for Windows 98/Me Although Digital Signature Not Power on your computer and start Windows UB5 USB Printer A4/Letter* driver Windows XP Installing Panasonic-DMS software and Twain driver Click the Install Panasonic-DMS Software buttonClick on the desired language Scanning Removing the driver and softwareRemoving Panasonic-DMS software and Twain driver Acquire Image..., or click Computer Interfacing Panaboard Operation Panel Status Box PrintingAbout Button Close Button Cleaning the screen and the unit Daily Care and MaintenanceCleaning the printer head, platen roller and pick-up roller Caring for the eraser Daily Care and Maintenance Symptom Care and Remedy See Troubleshooting Indication Cause Remedy See Troubleshooting Meanings of error codes Specifications Model No UB-5315 UB-5815Option and Separately available