Panasonic UB-5315 Removing the driver and software, Scanning, Acquire Image..., or click

Computer Interfacing

English

■Removing the driver and software

Removing Panasonic-DMS software and TWAIN driver

If you need to remove the Panasonic-DMS software and TWAIN driver, perform the following steps.

1 Power on your computer and start Windows.

•Log on as an administrator for Windows 2000 or Windows XP.

2 Click [Start], move the pointer to [Programs]–[Panasonic]–[Panasonic Document Management System]– [Uninstall].

(For Windows XP, [All Programs] instead of [Programs].)

3 Select the [Remove] check button and click the [Next] button.

4 Follow the instructions on the screen.

5 After uninstalling, restart your computer.

■Scanning

You can scan images on the screen to your computer by operating Panasonic-DMS.

1 Click [Start], move the pointer to [Programs]–[Panasonic]–[Panasonic Document Management System]– [Document Manager].

(For Windows XP, [All Programs] instead of [Programs].)

• The Panasonic-DMS software runs.

2 Click the [File] menu, then click [Select Source...].

3 Select [Panaboard-UB5 USB TWAIN Driver] and click the [Select] button.

4 Click the [File] menu, then click

[Acquire Image...], or click the

(scanner) icon on the Toolbar.

•The Panaboard Operation Panel will appear.

Note

•When the Panaboard Operation Panel is not displayed, check the USB cable connection or the condition of the electronic board.

5 Click the (Scan) button or the (2-Screen Scan) button.

•Scanning starts and the scanned image will be displayed on the screen of the computer. It is also possible to start scanning using the Copy Key or 2-Screen Copy Key on the electronic board.

6 Click [Close] on the Panaboard Operation Panel to finish scanning.

•About the Document Manager, refer to the Document Manager System operating instructions in the CD-ROM.

Note

•Dragging the Panaboard Operation Panel or activating other software programs may cause scanning troubles.

29