Daily Care and Maintenance
Always turn off the power switch and unplug the power plug when cleaning outside and inside the unit.
■Cleaning the screen and the unit
Gently wipe the screen film and unit with a water- dampened cloth that has been thoroughly wrung.
•Use a kitchen cleaner diluted with water for
•If you accidentally write on the board with an
marker, wipe with a small amount of ethyl alcohol.
Notes
•Do not use thinner, benzine or cleaners containing abrasives as this may result in discoloration.
•Do not wipe the screen film with a dry cloth as this may generate a static charge.
■Caring for the eraser
When the erasing surface of the eraser becomes dirty, hold down the sheet under the top sheet with your finger and peel off the dirty sheet by pulling in the direction of the arrow.
Note
•When the eraser becomes thin, make sure that the corners of the eraser do not strike the screen during erasing as this may damage the screen.
■Cleaning the printer head, platen roller and pick-up roller
If black streaks appear on the copy, clean the printer head and the platen roller.
If paper jams occur frequently, clean the
1 |
Printer door |
Push down the printer open lever and open the printer door.
32
