The ANUJ 3000/3500 is an UV curing device that quickly hardens UV resins (inks, adhesives, and coatings) via irradiation with UV light from an LED light source. The focused application of UV radiation to UV resins coated on minute surfaces (2 to 3 mm dia.) such as the lenses of CD, MD, and DVD players, and the LCD panels of notebook PCs, enables precise adhesion.
Higher radiation intensity and a wider range of applications. Shorter production cycles.
■Long LED life: 20,000 hours (LED life: Total irradiation time before UV intensity falls to 70% of
initial value)At least six times longer LED life than a comparable lamp model, enabling reduced running costs.
■UV curing without temperature increasesUses a single
heat damaging the workpiece.
■UV intensity stabilizationUV intensity is kept constant, even if the ambient or LED temperature changes.
At 12 mm dia. by 50 mm len., the LED is easy to mount on a jig. Mounting the LED head in place reduces overheating and increases UV intensity.
■No cooling fan, enabling cleanroom useThere is no need to deal with exhaust.
■Programmable UV irradiation with four independently controlled headsEach LED head can be controlled independently. The heads can also be controlled all together or in combination. Up to eight different operation programs can be stored for each channel, including one program for the constant intensity irradiation and seven programs composed of up to 10 steps each.
Program examples
Simple mode | Up to 7 programs can be set. |
[Lamp type] |
|
Four units need to be installed | One controller handles processes |
separately for processes 1 to 4. | 1 to 4. |
1
UV intensity
|
|
|
|
|
|
|
|
| (closed) |
|
|
|
|
|
|
|
|
|
| |
| Constant |
|
| Fiber |
| |
|
|
|
|
| ||
| intensity | Interval |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Time |
| Process 1 Process 2 Process 3 Process 4 | Process 1 Process 2 Process 3 Process 4 |
|
|
|
1