4 Installation

Install and set up the product according to the following conditions.

4.1Installation conditions

Warning

Wall

1)Ambient temp.: Controller: 0 to +35°C Head: +5° to +35°C

2)Relative humidity: 30 to 85% (at 25°C, no condensa tion)

3)When setting up the controller, make sure that its rubber feet are horizontally level.

4)To prevent damage due to overheating, make sure that the area around the controller is free of any obstructions.

5)The dimensions of the controller are 80 mm (L) × 130 mm (H) × 145 mm (D), but remember that the controller will have one or more LED heads attached during use. The radius of the LED head connector cable should

be no less than 33 mm, otherwise the cable may become damaged. Never place anything on top or below the controller, or obstruct the ventilation openings in any way. Otherwise, overheating and burning may occur.

Approx. 50 mm

Approx. 20 mm

Wall

Ensure that there is enough space above and on the sides of the controller.

Warning

If using more than one controller, do not bundle the supplied AC adapters together. Otherwise, the AC adapters may overheat and fail.

6