Manuals / Brands / Power Tools / Work Light / Panasonic / Power Tools / Work Light

Panasonic 35, UJ30 5.4 Connecting the AC adapter, 5.5Power-onoperation

1 69

Download 69 pages, 2.9 Mb

Getting started

5.4 Connecting the AC adapter

Plug the connector of the supplied AC adapter into the AC adapter connector on the rear panel. To ensure that the controller is completely disconnected from t he power supply, unplug this connector.

Only connect the power plug end of the AC adapter to a power socket after the controller is fully set up.

Warning

The supplied power cable is a 100 V (AC) cable for use in Japan.

5.5Power-on operation

To start up the controller, insert the supplied power key into the power key switch and turn it clockwise.

When the power is turned on a beep will sound and the display will indicate startup status. The display will then change to operation mode (under the default setting).

Contents

LED UV Curing System Aicure SPOT Type Safety Precautions for Users Laser products Preventive safety measures for users (summary) Safety features ■Remote interlock ■Control by a key switch ■LED radiation emission warning ■Emergency reset Labels ■Warning labels in Japanese (JIS) ■Description ■Warning labels in Chinese (GB standards) ■Warning labels in English (IEC/EN standards) Prohibited Mandatory Instruction Precautions for use ■General precautions ■Installation environment Ambient temperature Ambient humidity: Warranty Period Extent of Warranty Page Contents 1 Features of the ANUJ 3000/3500 ■High-powerirradiation: 10,000 mW/cm2 (with ANUJ6423 lens) initial value) ■UV curing without temperature increases ■UV intensity stabilization Features of the ANUJ 3000/3500 The ■Universal design for easy operation ■Multiple safety features ■Detachable terminal blocks for external connection ■Universal power supply 2 Part names and functions Controller Optional parts (sold separately) Front of the controller UV sensor (option) Rear of the controller AC adapter ●Front 4.1Installation conditions 4.2 General guidelines for irradiation distance and UV intensity Page 5.1Hooking up the connection cable Connection cable Getting started <Procedure 1.Plug in the connection cable 2.Connect the LED head to the connection cable 3.Remove the protective cap from the LED head 5.3Connecting the external control signals 5.4 Connecting the AC adapter 5.5Power-onoperation 6.1Operation mode (default mode when power is turned on) Operation modes Page Page 6.2UV measurement and Auto tuning mode Page 6.3Default settings mode 6.4Timing chart Page Page Page 7.1External input/output control External control Output Specification ・Rated load voltage: 5 V DC to 28 V DC ・Max. load current: 100 mA (per 1 output) ・Maximum voltage drop is less than 0.9 V when output is given 7.2Serial communication control Page Page Page 7.3Communications address map Page Page Page Page Page Page Page Page 7.4Setup tool application for UJ35 Page Page Page Page • LED status for each CH differentiated by color • When irradiation is possible, READY ON is highlig hted • If an error occurs, an error number is displayed • Panel showing error list can be displayed at any time • During irradiation START is highlighted Page 8 Warning indications ■Temperature warning ■Error codes 9.1Safety circuit 10.1Outline of specifications Specifications 11 Dimensions Page Page 12.1Options and spare parts Option and spare parts list 12.2How to replace the lens unit 12.3Fitting the mounting bracket Troubleshooting Manual revision history