Getting started

Rear panel

<Procedure>1.Plug in the connection cable.2.Connect the LED head to the connection cable.3.Remove the protective cap from the LED head.

Set the LED jig in place.

<Reference> Heat dissipation device (aluminium) (A metal fixture attached to the head)

2-M4 (5mm D)

M6 (5mm D)

Warning

Warning

The rise in LED temperature depends on the duration of irradiation time and the interval between irradiations. If the temperature increases beyond a certain point an alarm will be generated. In the event of such overheating, increase the size of the heat dissipation fixture, or add fins to it.

If the LED head is not fixed to a jig, the LED head can become very hot during irradiation. For this reason, do not touch the head directly with your hands during irradiation.

10