LED product safety precautions

LED Product Classification

The light source of the LED head connected to this product is classified as 3B under the JIS C6802 “Safety of laser products.”

Max output: 780mW

Wavelength: 365±5 nm

Class 3B LED Product

JIS C6802: 2005

Max output: 940mW

Wavelength: 385±5 nm

Class 3B LED Product

JIS C6802: 2005

 

 

DANGER

Controlling or calibrating this product by other than the procedures stipulated here could cause exposure to dangerous LED radiation.

・Do not look directly at LED-UV light, or at LED-UV light reflected in a mirror or other reflective surface. Doing so could cause eye damage.

・Install the main unit so that humans are not exposed to LED-UV light. Exposure could injure the skin or cause other injury.

・Always turn off the key switch before cleaning the LED head.

Cleaning the head while the switch is on could cause eye damage or injury to the skin.

・Never disassemble this product.

Disassembling this product could cause exposure to LED-UV light, causing eye damage or injury to the skin.

・If there is a risk of the LED-UV light being exposed to UV reflective light, place the product inside a cover with proper reflectance and heat characteristics to block that reflected light.

・When operating the controller, set up the system so that the path of the LED-UV light is not at eye level.

・It is strongly recommended that a protective barrier be placed around the product, so that people cannot approach it while it is operating.

・Always wear the UV protective goggles when using this product.

・Never operate this product in a manner not described in this manual. Doing so risks exposure to LED-UV light.

Safety Precautions for Users

JIS C6802 stipulates user guidelines pertaining to safety precautions to be taken by users and management standards.

In the case of this product, please implement safety precautions for a class 3B LED product. See JIS C6802, “Safety of laser products” for details. In the abroad, see the standard according each country.

ii