6 Operation modes

6.1Operation mode (default mode when power is turned on)

■Status check

Displays in Operation mode

Display

Descriptions

 

 

 

 

 

 

EMISSION switch.

 

 

 

Pressing it will start irradiation.

 

 

Stays on during irradiation.

 

 

 

 

Indicates that irradiation is ready to start.

READY

Stays on while irradiation is ready to start.

 

Stays off during irradiation.

 

 

 

 

Indicates CH selection and active CH during

 

irradiation. Also

indicates

temperature

CH1～4

warnings and errors.

 

 

 

 

 

 

Green: During selection

 

 

Orange: Temperature warning or error

 

Red: During irradiation

 

 

The “CH” indicators of 7-seg flash during

 

irradiation.

 

 

 

 

 

UV intensity modulation (0-100%)

 

LED replacement time (0.01-999 × 100 hrs)

Green (7-seg) display

CH of temp. warning or error (CH1-4)

 

 

UV intensity setting (“---,” 0.01-49.9 W/cm 2)

 

 

 

Irradiation time (Con, 0.00-999 sec.)

 

LED head temp. (0-999TEMP)

 

Red (7-seg) display

Cumulative LED use (0-999 × 100 hrs)

 

Error code (E00~E99)

 

 

UV intensity setting (0.00-49.9 W/cm2)

 

 

 

 

 

Appears when UV

intensity

modulation is

%

displayed

 

 

 

 

 

 

 

sec

Appears when irradiation time is displayed

 

 

TEMP

Appears when LED temperature is displayed

 

 

 

 

Appears when LED

replacement time and

×100hrs

cumulative LED use are displayed

 

 

 

 

Appears when UV intensity is displayed

W/cm2

 

 

 

 

 

LOCK

Settings are locked (no changes can be made)

 

 

 

 

13