●Front
(1) EMISSION switch | (2) READY indicator |
| |
(9) Display unit |
|
(8) Operation switch | (3) |
| |
| (4) |
(7) UV check switch |
|
(only UJ35) |
|
(6) UV sensor | (5) Key operated power switch |
| |
connection port (only UJ35) |
|
●Rear | (10) Input/Output terminal block |
| |
(13) |
|
connecting connector |
|
(14) Protective seal |
|
| (11) RS232C connector |
(12) AC adapter connector | (only UJ35) |
Description | Function | Remark | |
|
|
| |
(1) EMISSION switch | UV is irradiated and stopped by selected irradiating CH head. Red lamp is turned on |
| |
during UV irradiation. |
| ||
|
| ||
(2) READY indicator | Indicates that UV irradiation is enabled (ready to start). |
| |
|
|
| |
(3) | Selects the LED head channels for irradiation. |
| |
operation switch |
| ||
|
| ||
(4) | Red = irradiation, green = standby, yellow = error |
| |
selector/indicator |
| ||
|
| ||
(5) Key operated | Commences/finishes operation of the controller. |
| |
power switch |
| ||
|
| ||
(6) UV sensor | Connects the special UV sensor. | UJ35 only | |
connection port | |||
|
| ||
|
|
| |
(7) UV check button | Views/calibrates values measured by the special UV sensor | UJ35 only | |
|
|
| |
(8) Operation unit switch | Specifies irradiation conditions (intensity and time), replacement time settings, and |
| |
initial values, and switches the display. |
| ||
|
| ||
(9) Display unit | Displays irradiation conditions (intensity and time), replacement time settings, head |
| |
temperature, and initial values. |
| ||
|
| ||
|
|
| |
(10) Input/output terminal | Connects a PLC, foot switch, or other external device |
| |
block |
| ||
|
| ||
|
|
| |
(11) RS232C connector | Connects a PC, PLC, or other external device with RS232C. | UJ35 only | |
|
|
| |
(12) AC adapter connector | Connects the special AC adapter. |
| |
|
|
| |
(13) | Cconnects LED heads. |
| |
connecting connector |
| ||
|
| ||
(14) Protective seal | Protects connectors. |
| |
|
|
|
5