Frame rate: "Full, 1/2F, 1/4F, 1/8F, 1/16F"
Default: "Full"
Stream type: "CBR/VBR"
Default: "CBR" (If screen changes seem extreme, the setting made at "VBR" is preferable.)
Period: "Period1/Period2" Default: 00:00 - 24:00
(The setup time for "Period1" (or "Period2") is dis- played when the VMD recording function is started.)
Cautions:
1.When setting is completed, set "Period1" and/or "Period2" to "On".
2.For [All] operation and functions, refer to the timer recording explanation.
(3)When setting is completed, move the cursor to [Ok] and press the [SET] button.
VMD Area Setup (AREA SETUP)
(1)Move the cursor to [OK] and press the [SET] button in the "VMD REC" menu. A motion detector area setup screen is displayed.
The colorless areas are where the motion detection is not set.
Cursor |
The green areas |
are where the |
motion detection |
has already been |
set. |
(2)Areas in green and without color are displayed on the screen. In the green area, the motion detector has already been set up, while no setting has been made in the colorless area. Move the cursor to a setting place with the direction button and press the [SET] button. The grid color is turned from green to colorless or from colorless to green, and the setup change of that grid is displayed.
(3)Press the [ESC] button to save the setup conditions of the motion detector area. Move the cursor to [OK] and press the [SET] button and make settings for parame- ters other than those of "VMD REC".
Notes:
1.When trying to stop the recording by changing the set- tings in the process of the VMD recording, recording will not stop immediately. The VMD recording will not stop unless time set for "Rec. Interval" has been passed. To stop the VMD recording, stop recording manually after changing the settings for the VMD recording.
2.While "NetBackup" (data backup function) is being per- formed using the provided software, VMD response may be delayed.
Record length (RECORD LENGTH)
(1)Press the [MENU] button.
REC & EVENT
TIMER REC
TERMINAL REC
VMD REC
RECORD LENGTH
AUDIO SELECT
(2)Move the cursor to "RECORD LENGTH" and press the [SET] button.
| RECORD LENGTH |
|
| ||||
|
|
|
|
| |||
Time Per File |
| 015 |
| Min | |||
|
|
|
|
|
|
|
|
| OK |
|
| Cancel |
|
| |
|
|
|
|
|
|
|
|
Setup enabled range: 005 - 240
Default: 15
Note: If the "RECORD LENGTH" setup conditions are changed in the middle of recording, setting becomes effective at that time point.
(3) Move the cursor to [OK] and press the [SET] button.
Audio selection (AUDIO SELECT)
(1)Press the [MENU] button.
REC & EVENT
TIMER REC
TERMINAL REC
VMD REC
RECORD LENGTH
AUDIO SELECT
38
