Panasonic WJ-RT208 manual Report Report, System log System LOG

DATA PORT SETUP

Camera Port		Channel No.
1				001
2				002
3				003
4				004
5				005
6				006
7				007
8				008
	OK		Cancel

(2)Assign a camera number (to be operated using the controller) for each camera port using the camera selection buttons.

(3)After completing the camera number assignment, move the cursor onto [OK] and press the [SET] but- ton.

Note:

To associate the camera number with the unit address (unit number) on the system controller, it is necessary to select "Enable" displayed on the LCD on the system controller first. When connecting the system controller with multiple recorders and is it necessary to change the camera number settings, select "Disable" for the set association setting of the selected camera number before changing the cam- era number settings.

Refer to the operating instructions of the system controller for further information about the associa- tion settings between the camera number and the unit address (number).

3.1.7 Report (REPORT)

System log (SYSTEM LOG)

(1)Press the [MENU] button. "WJ-RT208 SETUP MENU" appears.

WJ-RT208 SETUP MENU

SYSTEM MANAGEMENT

SEARCH

REC&EVENT SETUP

PTZ SETUP

CAMERA SETUP

COMMUNICATION SETUP

REPORT

USER INFORMATION

DATA MANAGEMENT

(2)Move the cursor to "REPORT" and press the [SET] but- ton.

REPORT

SYSTEM LOG

EVENT LOG

OLDEST DATA INFORMATION

(3)Move the cursor to "SYSTEM LOG" and press the [SET] button.

The result of queries into the system diary is displayed.

SYSTEM LOG

No. Time & Date Event p 01/23

12005-01-24 10:43:22 Modify Network

22005-01-24 09:43:22 [MANAGER] Login

32005-01-24 08:43:22 [L]Modify Time

42005-01-24 07:43:22 Modify Timer Rec.

52005-01-24 06:43:22 Modify VMD Rec.

62005-01-24 05:43:22 Modify Operator Pswd

72005-01-24 04:43:22 Modify Manager Pswd

82005-01-24 03:43:22 Restore Default Set

92005-01-24 02:43:22 Format Disk=1

10 2005-01-24 01:43:22 [L]Reset System

Prev Next Return

Note: When the same operations are performed for three times or more, only the latest and the oldest system logs will be displayed.

(4)Contents of system log descriptions are as follows: "System Startup"

"Invalid Password" "[MANAGER] Login" "[OPERATOR] Login" "[VIEWER] Login"

"[L] Update Sys Settings" "[L] Modify Time"

"[L] Reset System" "Modify Timer Rec." "Modify VMD Rec." "Modify Terminal Rec." "Modify Rec. Reserve" "Modify Network" "Modify Manager Pswd" "Modify Operator Pswd" "Modify Viewer Pswd" "Restore Default Set" "Format Disk=m" "Repair Directory Diskm" "Disconnect User=n" "[R] Control User Login" "[R] Video User Login" "[R] Update Sys Settings" "[R] Modify Time"

"[R] Reset System"

42