(2)Move the cursor to "AUDIO SELECT" and press the [SET] button.
| AUDIO SELECT |
| |
Audio1 | Audio2 | Audio3 | Audio4 |
Audio5 | Audio6 | Audio7 | Audio8 |
OK |
| Cancel | |
(3)Use the direction button (up/down) and move the cur- sor to the setting channel. The radio button is lit up and recording takes place when the audio signals are sent.
Note: Even though recording is performed within the same time period, much more hard disk capacity is needed for recording with audio signals than recording without audio signals.
3.1.4 PTZ setup (PTZ SETUP)
PTZ selection (PTZ SELECT)
For the selection of the camera, refer to "2.5 Camera Control."
Preset position information (PRESET INFORMA- TION)
(1)Press the [MENU] button. Move the cursor to "PTZ SETUP" and press the [SET] button.
PTZ SETUP
PTZ SELECT
PRESET INFORMATION
(2)Move the cursor to "PRESET INFORMATION" on the "PTZ SETUP" dialog box and press the [SET] button.
PRESET INFORMATION
Camera | 1 |
|
|
Preset | 001 |
|
|
| Call |
Return
Camera No.: 1-8
Default: 1 (Adjusted with the (right/left) direction button)
Preset: 001 - 256
Default: 001 (Move the cursor by using the direction button (right or left), and enter the preset posi- tion number by using the numeric buttons.
Call: Move the cursor to "Call" and press the [SET] but- ton. The camera turns to the preset position of the selected number.
Note: For PTZ preset position setting, refer to 2.5.6.
(3)When confirmation is completed, move the cursor to [Return] and press the [SET] button.
3.1.5 Camera setup "CAMERA SETUP"
(1)Press the [MENU] button.
SYSTEM MANAGEMENT
SEARCH
REC&EVENT SETUP
PTZ SETUP
CAMERA SETUP
COMMUNICATION SETUP
REPORT
USER INFORMATION
DATA MANAGEMENT
(2)Move the cursor to "CAMERA SETUP" and press the [SET] button.
CAMERA SETUP |
| |
Channel No. | 1 |
|
CH Enable | On |
|
Mask Area | Set |
|
Mask Enable | Off |
|
PTZ Protocol | PANASONIC | |
Rec. Reserve | 000 | Days |
Channel Name | CH1 |
|
All | OK | Cancel |
Camera No.: 1 - 8 |
|
|
Default: 1
CH Enable: "On/Off"
Default: "On"
Mask Area: Refer to note 4 below.
Mask Enable: "On/Off"
Default: "Off"
PTZ Protocol: "PANASONIC/TYPE1/TYPE2/TYPE3/
TYPE4"
Default: "PANASONIC"
Rec. Reserve: 000 - 200
Default: 000
39
