(4)After completing the settings, press the [MENU] button again to close the camera setup menu.

Caution: When displaying the Special Menu, move the cursor to "SPECIAL" on the camera setup menu and press the camera selection button [2].

When returning the camera settings to the default settings, move the cursor to "CAMERA RESET" and press the camera selection button [3].

Press the [ESC] button to move from the Special menu back to the previous menu.

2.6 Control this Unit with a PC

When this unit is connected to a network, it is possible to operate and set up this unit with the software on the acces- sory disc.

In this case, outlined explanations will be given about the functions available and requirements for the computer con- figuration.

For details about each function, refer to the Network Operating Instructions on the accessory disc.

2.6.1 Outlined functions

Display of live monitoring screen and recording

Playback and downloading of the recorded data

Setup of this unit

Event notification (Alarm)

Automatic time and date adjustment

2.6.2 Computer configuration

A computer with the configuration specified below is rec- ommended. If a computer other than the recommended one is used, some problems may arise including software not starting, delayed screen display, and operation failures.

 

Microsoft Windows 2000 Professional SP4

OS

Microsoft Windows XP Professional or Edition

 

SP2

 

 

PC

IBM PC/AT Compatible

 

 

CPU

Intel Pentium 4, 2.4 GHz or faster

 

 

Main

DDR 512 MB

Memory

 

 

 

Graphic

Independent larger than 64 MB

Memory

 

 

 

Display

Overlay supported

Driver

 

 

 

Interface

100 MB network interface card built-in

 

 

Monitor

Resolution: better than 1024 x 768,

24 bit true color

 

 

 

Others

Direct X 8.0a or later

 

 

Notes:

*If the Graphic Memory is not over 32 MB, only a maxi- mum of four channels can be connected to the NetClient.

*The NetClient cannot be started unless the display driv- er overlay is applied.

*For some display driver versions, the NetClient may fail to start normally. In this case, update the display driver to the latest version.

31

Page 31
Image 31
Panasonic WJ-RT208 manual Control this Unit with a PC, Outlined functions, Computer configuration