Gateway/Proxy: If you set the Connection Type to WAP, Gateway is displayed. If you set it to HTTP, Proxy is displayed.
Press the [o] key to display the subfunctions IP Address, IP Port, Login ID and Password then input the appropriate information for each of the following subfunctions, inputting the information provided by your service provider.
APN: (Access Point Name.) Press the [o] key to input the appropriate APN.
Login ID: Press the [o] key to input the appropriate login ID.
Password: Press the [o] key to input the appropriate password
•DNS Settings: Input the appropriate IP address for the Domain Name Server. You can input the primary and secondary DNS.
NOTE: This function is available only when your Connection Type is set to HTTP.
•Bearer: Select the bearer type for each type of network access. Press the [l] or [r] scroll key to select GSM Only or GPRS Only.
•Reset Profile: Press the [o] key to reset the settings of the selected profile. Press the [l] or [r] scroll key to select Yes or No.
WAP 
Cache
This function sets up your phone’s cache. This feature is used to store WAP pages directly on your phone, to display them rapidly when you return to them.
Cache Mode
This function sets up the cache memory check, which verifies whether the WAP page’s information is already stored in your phone’s cache memory.
❶Press the [Menu] Soft key then select 8.Connectivity then select 1.WAP then select 7.Cache then select 1.Cache Mode.
❷Select one of the following options.
•Always Check: The cache is always checked whenever a URL is loaded.
•Never Check: The cache is never checked.
Clear Cache
This function clears all data stored in the cache (recently visited WAP pages).
Press the [Menu] Soft key then select 8.Connectivity then select 1.WAP then select 7.Cache then select 2.Clear Cache.
91
