Paradyne 6382 manual Quick Start Static

3. Using the Web Interface

Figure 3-5. Quick Start - Static

Enter or select Quick Start options as shown in the following table.

Table 3-1. Quick Start Options

Field	Description
NAT	Click in the check box to activate Network Address Translation
	(NAT). See Appendix A, Terminology, for a description of NAT.
Firewall	Click in the check box to activate the firewall. See Appendix A,
	Terminology, for a description of a firewall.
Username (PPPoE)	Enter the user name given to you by your service provider.
Password (PPPoE)	Enter the password given to you by your service provider.
IP Address (Static)	Enter the IP address to be assigned to the router.
Mask (Static)	Enter the subnet mask to be applied to the IP address.
Default Gateway (Static)	Enter the IP address of a default gateway. Packets for which
	the router has no appropriate route are sent to the default
	gateway.
DNS 1–3 (Static)	Enter the IP address of the primary domain name server, and
	optionally the addresses of a secondary and tertiary DNS to
	be used if the server before it is unavailable.

Click on Save to make the changes permanent.

3-4 April 2005 6382-A2-GB20-00