Paradyne 6382 manual TCP/IP Properties in Windows XP

2. Hardware Installation and PC Setup

5.In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button labeled “Use the following IP address” and type 192.168.1.x (where x is any number between 2 and 254) in the IP Address field. Type 255.255.255.0 in the Subnet Mask field.

Figure 2-4. TCP/IP Properties in Windows XP

6. Click on OK twice to confirm your changes, and close the Control Panel.

Windows 2000

To configure the IP address under Windows 2000:

Procedure

1.In the Windows task bar, click on the Start button, point to Settings, and then select Control Panel.

2.Double-click on the Network and Dial-up Connections icon.

3.In the Network and Dial-up Connections window, right-click on the Local Area Connection icon, and then select Properties.

The Local Area Connection Properties dialog box is displayed with a list of currently installed network components. If the list includes Internet Protocol (TCP/IP), the protocol has already been enabled, in which case you can skip to Step 10.

6382-A2-GB20-00 April 2005 2-5