Manuals / Patton electronic / Computer Equipment / Network Card

Patton electronic 2616RC user manual Hardware overview

Models: 2616RC

1 80

Download 80 pages 10.28 Kb

Page 15

Hardware overview

Model 2616RC T-DAC User Manual	1 • Introduction

Hardware overview

The Model 2616RC combines transmission and networking technology concentrating 16 T1/E1 WAN links into a single slot blade for a Patton ForeFront chassis. The T-DAC front blade (see figure 2) contains a full set of LED status indicators presented on the front panel, and an RS-232 async control port. The rear blade pre- sents electrical connections for T1/E1 WAN ports as well as an alarm LED.

Midplane

Front Blade

Rear Blade

Front

Rear

Side view

Figure 2. Model 2616RC T-DAC features

WAN

The 2616RC includes 4, 8, 12, or 16 ports selectable for T1 or E1 operation. The T1/E1 ports may be con- nected to ATM/FR/DDN/IP network backbones and are accessible via the 68-pin SCSI connector in the rear of the unit. Also included are:

•4 to 16 built-in T1/E1 CSU/DSUs

•T1 1.544 Mbps with D4 or ESF framing, AMI or B8ZS line coding, FCC part 68 compliant

•E1 2.048 Mbps multi-framing with or without CRC4 framing, AMI/HDB3 line coding, CTR-12, and CTR-13 compliant

•Built-in fuses and surge protectors

LAN

The 10/100-Mbps Ethernet LAN port is presented on an RJ-45 connector with an auto-sensing/full-duplex 10Base-T or 100Base-T interface. Also included are:

•100Base-TX half-/full-duplex operation (100 + 100)

Hardware overview

15

Image 15

Patton electronic 2616RC user manual Hardware overview

Contents

Technical Support +1 301 T1/E1 TDM-Digital Access Concentrator T-DACModel 2616RC User Manual7622 Rickenbacker Drive Gaithersburg, MD 20879 USA Tel +1 301 Summary Table of Contents Introduction ContentsHardware installation 3 Configuring the T-DAC for operation6 Contacting Patton for assistance Troubleshooting and maintenanceContents Operation and shutdownContents Warranty Service and Returned Merchandise Authorizations RMAsA Compliance information List of Figures Model 2960 RAS Getting Started Guide 4 RJ-45 plug pin-out 5 WAN cable’s 68 non-terminated twisted-pairs List of Tables6 Symptoms 7 LED definitions 1 General conventions 2 Mouse conventions 3 LED definitionsAbout this guide AudienceStructure Safety when working with electricity PrecautionsTypographical conventions used in this document General conventionsMouse conventions Chapter contents ChapterIntroduction Figure 1. Model 2616RC T-DAC Model 2616RC T1/E1 T-DAC overviewHardware overview Management services Power systemTemperature Physical dimensionsFigure 3. Model 2616RC front panel LEDs SNMP version 1 configuration management MIB TELNET via EthernetSYSLOG Client Remote Software Upgrade via FTP Frame Relay or PPP in-band management via T1/E1 DS0sStatus LED displayTable 3. LED definitions ColorHardware installation Chapter contentsChapter T-DAC blades installation IntroductionUnpacking the Model 2616RC T-DAC Figure 4. Alignment/ESD pin and card handle T-DAC blades installationConnecting the Ethernet ports Cable installationConnecting the EIA-561 RS-232 configuration port DCE configured 68-pin SCSI to 8 RJ-45 connectors cable Connecting the T1/E1 WAN portsDescription 68-pin SCSI to open end cable Figure 13. 68-pin SCSI connectorFigure 12. SCSI-to-open-end WAN cable Table 5. WAN cable’s 68 non-terminated twisted-pairs Installing the WAN cable to a punch-down block 68-pin SCSI to 64-pin female Telco part #10-3096TM68/64-6 68-pin SCSI to open end, 6 foot cable part #10-3096TM68-6-ObsoleteCompleting the hardware installation Completing the hardware installationChapter contents Chapter 3 Configuring the T-DAC for operationConfiguration prerequisites IntroductionDefining static connections with DS0 mapping see page Connecting the DB9-RJ45 adapter with the included cable Initial configuration through the RS-232 control portSetting up the HyperTerminal or similar program session Figure 17. Connection Description windowFigure 18. Connect To window 7. Click on the File menu, then select Properties Figure 20. Terminal keys configuration3 Configuring the T-DAC for operation Initial configuration through the RS-232 control port11. For the user name, type superuser Using a browser to complete Model 2616RC configuration Home page overview Displaying the T-DAC 2616RC web administration pagesFrom the Home page, the following actions can be performed Configuring the default gateway Example Configuring the system clocking parametersFigure 29. System Clocking Configuration page, example 4. For Clock Reference select master15. For Main Reference select wan-11 6. For Fallback Reference select wan-226. Click the Submit Query button shown in figure 3. For Clock Reference select secondary2 or slave3Configuring the DS0 mapping Example Examples for configuring static connectionsSolution Solution7. Under Dev Type B, select toH110 Configuring line settings and signaling for E1Accessing the Line Interface Settings 10. Click the Submit Query button. Card 2 mappingConfiguring the E1 line interface settings Figure 37. WAN Circuit Configuration page, Line Interface SettingsFigure 36. T1/E1 Link Activity Ports 1 - 4 page Figure 40. Line Build Out pull-down menu with e1pulse1 selected 3. From the Line Build Out pull-down menu figure 40 select e1pulse1Figure 38. Line Type pull-down menu Figure 39. Line Coding pull-down menu with dsx1HDB33 selectedFigure 42. T1/E1 Link Activity Overview page Configuring line settings and signaling for T1Accessing the Line Interface Settings Figure 41. E1 ALARMS PRESENT indicatordsx1D4 - indicates AT&T D4 format DS1 Configuring the T1 line settings1. From the Line Type pull-down menu figure 45 select either dsx1ESF2 - indicates Extended SuperFrame DS13. From the Line Build Out pull-down menu figure 47 select t1pulse0dB1 Enabling/disabling the alarm card Backing up your configuration parameters Saving your configurationFigure 51. IMPORT/EXPORT page To import or export a configuration, do the following3 Configuring the T-DAC for operation Backing up your configuration parametersBacking up the configuration store in flash memory 3 Configuring the T-DAC for operationBacking up your configuration parameters Completing the installation Note For information on activating and de-activating your Model 2616RC Chapter contents Chapter 4 Operation and shutdownIntroduction Activating the Model 2616RCDe-activating the Model 2616RC This chapter describes how to start up and power down the Model 2616RCTroubleshooting and maintenance Chapter contentsChapter Introduction Note When removing the 2616RC from the chassis, follow the proceduresStatus Fault analysisLocation ColorTable 7. LED definitions Continued DSX1 payload loop dsx1PayloadLoop T1/E1 port test modesFigure 55. Line Loop DSX1 line loop dsxLineLoopCalibration Periodic maintenanceMaintenance Exporting the current Model 2616RC configuration5 Troubleshooting and maintenance MaintenanceFigure 56. IMPORT/EXPORT page 3. To make a back-up copy of the configuration file currently stored in your T-DAC’s flash memory Removing the defective Model 2616RC Importing a saved configuration Installing the replacement Model 2616RCCompleting the installation Chapter contents Chapter 6 Contacting Patton for assistanceContact information Warranty Service and Returned Merchandise Authorizations RMAsWarranty coverage Out-of-warranty servicePatton Electronics Company Return for credit policyRMA numbers Shipping instructionsCompliance Appendix A Compliance informationChapter contents SafetyIndustry Canada Notice SafetyCompliance Radio and TV InterferenceFCC Part 68 ACTA Statement CE Declaration of ConformityAuthorized European Representative Chapter contents Appendix B 68-pin SCSI-to-open-end 6-foot cable part #10-3096TM68-6Introduction Introduction