Patton electronic 2616RC user manual For Clock Reference select secondary2 or slave3

Model 2616RC T-DAC User Manual 3 • Configuring the T-DAC for operation

2.Click the System Clocking hyperlink on the 2616RC Configuration Menu to open the System Clocking Configuration page (see figure 30).

Figure 30. System Clocking Configuration page, example 2

3.For Clock Reference select secondary(2) or slave(3).

Note If slave is selected you will not be able to configure the main or fall- back reference. If you selected slave(3), go to step 6. Otherwise, con- tinue on to step 4.

4.If you selected secondary(2) in step 3, for Main Reference select system(500).

5.For Fallback Reference select wan-1(1).

6.Click the Submit Query button shown in figure 31.

Figure 31. Clock Reference Submit Query button

7.Select enable(1) to enable the fallback reference clock.

8.Click the Clock Fallback Submit Query button shown in figure 32.

Figure 32. Clock Reference Submit Query button

Using a browser to complete Model 2616RC configuration 43