Patton electronic 2616RC user manual Setting up the HyperTerminal or similar program session

Model 2616RC T-DAC User Manual 3 • Configuring the T-DAC for operation

Setting up the HyperTerminal (or similar program) session

Do the following:

1.At your PC, find the file HYPERTRM.EXE. Open a HyperTerminal session by double-clicking on the file name.

Figure 17. Connection Description window

2.Type a connection name (e.g., 2616RC Config), select an icon, then click OK (figure 18).

Figure 18. Connect To window

3.On the Connect To window (figure 18), set Connect using: to one of the options named Direct to ComX (where the “X” refers to the number identifying the RS-232 serial port on the PC). In the following proce- dure, Com1 will be the used as the port identifier.

4.Click OK.

5.The COM1 Properties window displays.

Initial configuration through the RS-232 control port 34