Patton electronic 2616RC user manual Installing the WAN cable to a punch-down block

Model 2616RC T-DAC User Manual 2 • Hardware installation

Table 5. WAN cable’s 68 non-terminated twisted-pairs (Continued)

Port/Directio	Pairs	68 Pin	Wire Color
n		Positions	Code
	—	33	NOT USED
		67

Port/Directio	Pairs	68 Pin	Wire Color
n		Positions	Code
	—	34	NOT USED
		68

Installing the WAN cable to a punch-down block

Materials required:

•punch-down tool

•Plastic tie wraps

•WAN cable pin-out specification Procedure:

1.Measure the distance between SCSI cable entry point on the punch-down block frame and the farthest port to be wired on the punch-down block (see figure 14).

Figure 14. Punch-down block wiring

2.Strip SCSI cable insulation and shielding based on the measurement made in step 1.

Cable installation 28