Pelco dx4000 manual To modify live audio settings

Figure 33. Audio Recording Setup Menu

3.For each camera, modify the following settings, and then press the Enter button.

•Turn audio recording on or off.

•Associate an audio channel with a camera.

4.After these settings are modified, press the Return button until all menus are cleared. A message appears stating that the settings are being saved.

To modify live audio settings

1.If it is not already displayed, select Audio from the main menu of the DX4000, and then press the Enter button. The Audio menu appears.

2.Select Live Audio Setup, and then press the Enter button. The Live Audio Setup menu appears.

Figure 34. Live Audio Setup Menu

3.For each camera, modify the following settings, and then press the Enter button.

•Turn live audio on or off.

•Select a monitoring channel. Choices are 1 through 4.

•Select the network audio type. Associate an audio channel with a camera. With one-way audio, the DX4000 can record audio signals along with the video. With two-way audio the remote agent can send audio to a speaker that is connected through the DX4000. You might use this feature to allow an operator at a remote computer to communicate with a person waiting at a locked door or a similar situation. Audio transmitted from the remote agent is not recorded.

4.After these settings are modified, press the Return button until all menus are cleared. A message appears stating that the settings are being saved.

C2602M-C (3/07) 33