Figure 38. Relay Output Setup Menu
3.For each alarm, modify the following relay settings:
•Select an alarm, and change its relay output to Enable or Disable.
•Change the relay mode to Latched or Transparent.
•For latched relays, select a duration. Durations can last as little as five seconds, as long as five minutes, or until an operator manually turns off the relay with a key (Until Key-In).
4.Select the Relay Type field and set the relay to normally open (N/O) or normally closed (N/C).
5.After these settings are modified, press the Return button until all menus are cleared. A message appears stating that the settings are being saved.
36 |
|
