UltraPort Serial Adaptors User Guide
Installing under Windows 95 and 98 Page 20
Chapter 2 Installing drivers and host cards
General installation procedure for Windows 95 and 98
The general procedure for installing UltraPort and UltraPort SI only cards under the Windows
95/98 operating systems is as follows:
1. Install any UltraPort and UltraPort SI cards and cables or connector boxes you require
into your system. See Installing host cards and cable accessories on page 95.
2. Using the Windows Found New Hardware Wizard, install the UltraPort or UltraPort SI
device driver software. See Installing device drivers and utilities on page 21
3. If required, remove any host cards you want from your system. See Removing host
cards on page 101.
4. Using the Windows Device Manager, configure the serial ports you have added to the
system. See Configuring serial ports on page 25.
Note
The UltraPort and UltraPort SI device drivers for Windows 95/98 are
not included on your Windows 95 or Windows 98 CDROM.