UltraPort Serial Adaptors User Guide
Installing under Solaris Page 82
Chapter 2 Installing drivers and host cards
In the Admintool: Modify Serial Port window you can click on the Expert button to show
more fields, as shown in the next picture.
4. In the Admintool: Modify Serial Port window, set the parameters you require.
5. In the Admintool: Modify Serial Port window, click on OK to accept the changes you have
made and close the window.
6. Repeat steps 3. to 5. until you have configured the serial ports for all the host cards you
require.
7. In the Serial Manager menu click on Host > Quit to quit Serial Manager and close the
window.
Note
Because the system does not support the selection of speeds above
460800 bps, lower baud rates have been permanently remapped to support
higher port speeds. Remapped speeds are shown in the next table.
Selected speed (bps) Actual speed (bps)
50 921600