7. The FIFO Settings page is now displayed as shown in the next picture
Selects the port name for a given device.
Allows you to select the default port name or change it to any unused port name.
Default display is the currently assigned port name.
8.In the FIFO Settings page, select the configuration values you want and either click on the OK button or, if the COM port belongs to a UltraPort SI card, then you can click on the Protocol Settings tab to access the software switchable interface modes.In
Caution
It is strongly recommended that you do not make changes to the FIFO trigger levels or com port name unless you have a valid reason to do so.
UltraPort Serial Adaptors User Guide | Chapter 2 Installing drivers and host cards |
Installing under Windows 95 and 98 | Page 28 |
|
