15.In the message window click on OK to continue the installation process.
The following message is now displayed upon completion of the installation process.
16.In the message window, click on OK to close the window.
The software manager window is now updated to show the driver you have installed as shown in the next picture.
17.In the Software Manager window, click on the Host > Exit menu option to close the window.
18.Shut down your system and turn the power off.
You can now continue with the rest of the installation process see General installation procedure for SCO OpenServer on page 46.
UltraPort Serial Adaptors User Guide | Chapter 2 Installing drivers and host cards |
Installing under SCO OpenServer and OpenServer6 | Page 51 |
|
