Installing under Windows NT
The procedure for installing and configuring host cards, drivers software and associated utilities for the Windows NT operating system is as follows:
Note
The Perle PortDirector software contains drivers for the UltraPort and UltraPort SI host cards only.
You will need to install the PortDirector for Windows NT on your system in order to use the UltraPort and UltraPort SI host cards.
See the PortDirector user guide part number 5500028 for further details.
1.Install any UltraPort and UltraPort SI cards, cables or connector boxes you require into your system. See Installing host cards and cable accessories on page 95.
2.If required, remove any host cards you want from your system. See Removing host cards on page 101.
3.Use the PortDirector software to update your system with the revised number and type of host cards. See The PortDirector user guide part number 5500028 for further details.
Your system can now use the serial adaptor cards you have installed.
UltraPort Serial Adaptors User Guide | Chapter 2 Installing drivers and host cards |
Installing under Windows NT | Page 33 |
|
