Perle Systems Adaptors - page 57

UltraPort Serial Adaptors User Guide
Installing under SCO OpenServer and OpenServer6 Page 57
Chapter 2 Installing drivers and host cards
8. If required, in the Port Configuration window, select the ports whose logins status you
want to change, then click on one of the following to change the login status:
The selected ports in the list now are updated show their new login status. For example if
you enable the login for a port, a tick is displayed along side the port as shown in the next
picture.
9. Repeat steps 2. to 8. until you have configured all the ports you want.
Exiting the Port
Configuration tool 10.In the Port Configuration menu, click on Ports > Save & Exit.
The Port Configuration tool now closes and saves any changes you have made.
Tc Click on
Enable logins for a port Enable button
Disable logins for a port Disable button
Note
To quit the Port Configuration tool without saving changes,
• In the Port Configuration menu, click on Ports > Quit.