Preparation
9.03 Winding the bobbin thread, adjusting the thread tension4
6
| 1 |
|
3 | 2 | 5 |
|
Fig. 9 - 02
●Place an empty bobbin 1 onto bobbin shaft 2.
●Thread the bobbin in accordance with Fig. 9 - 02 and wind it clockwise around bobbin 1 a few times.
●Switch on the bobbin winder while at the same time pressing bobbin winder spindle 2 and lever 3.
The bobbin fills up while you are sewing.
●The tension of the thread on bobbin 1 can be adjusted with knurled screw 4.
●The bobbin winder stops automatically when bobbin 1 is full.
If the thread is wound unevenly:
●Loosen nut 5.
●Turn the thread guide 6 accordingly.
●Tighten nut 5.
9 - 3