Adjustment

11.04.16 Bobbin winder

Requirement

1.With the bobbin winder switched on, the bobbin winder spindle must engage reliably. With the bobbin winder switched off, friction wheel 5 must not touch drive wheel 1.

2.The bobbin winder must switch off automatically when the thread level is approximately 1 mm from the edge of the bobbin.

2

1

5

4

1 mm

3

Fig. 11 - 15

● Move drive wheel 1 (screws 2) in accordance with requirement 1.

● Place a bobbin on the bobbin winder, thread the bobbin and switch on the bobbin winder.

●Move stop latch 3 (screws 4) in accordance with requirement 2.

11 - 18