Adjustment
11.05.07 | Linkage rod |
Requirement
When shaft 9 begins its sliding motion, lever 6 must simultaneously lift from stop 7.
6 7
4
1
3
2
8 9
5
Fig. 11 - 23
● Affix spherical head 1 to control lever 3 using screw 2. ● Loosen nuts 4 (right and left handed thread).
●Bring the machine to needle rise position by turning the handwheel and activate engaging lever 5.
●Taking care to ensure that lever 6 is touching stop 7 (see arrow), turn linkage rod 8 in accordance with the requirement.
●In this position tighten both nuts 4.
●Carry out a check in accordance with the requirement.
11 - 26